Ohme's UK range is often shortlisted for smart-tariff households that want scheduled charging with a clear app. In the UK, prioritise a standards-based Type 2 AC install on a dedicated circuit, with smart scheduling if you use time-of-use tariffs. Compare written scopes for model, cable route, board work and warranty rather than badge marketing alone. Confirm live specs and any grant list entries before ordering.
What this guide covers
Ohme's UK range is often shortlisted for smart-tariff households that want scheduled charging with a clear app. This is an installation and buying brief for UK homes and light-commercial sites in September 2026, not a sponsored ranking.
Spec sheets change. Confirm live manufacturer data, installer warranties and any grant eligibility lists before you pay a deposit.
Home Pro versus ePod in practice
Home Pro is commonly considered where a fully featured smart wallbox is the goal. ePod-class options can suit simpler briefs when you still want Ohme software habits without overbuying.
Check current tethered and untethered SKUs, IP ratings and warranty length on Ohme's live UK pages before you decide.
- Confirm tariff partner compatibility on the latest list
- Match tether length to port reach
- Ask installers which model they stock and support
Tariffs and scheduling
Ohme's reputation in the UK is closely tied to smart scheduling with major energy suppliers. That only helps if your chosen SKU remains on the live compatibility list.
If you change energy supplier later, verify the charger still earns the intelligent features you expect.
- Screenshot your tariff requirements for the survey
- Decide whether the car or charger owns the schedule
Install notes
Treat Ohme like any other wallbox on survey day: board capacity, PME arrangements, mounting surface and cable route drive labour more than the badge.
Installation and electrical checks
A competent UK install covers dedicated circuit design, protective devices, earthing or open-PEN arrangements on PME supplies, mounting, weather sealing, testing and handover. Brand stickers do not replace those steps.
Ask for the charger model, tether length, cable route, board works, smart setup and exclusions in writing. Compare like for like across quotes.
Budgeting and next steps
Hardware price is only part of the bill. Labour, containment, posts and board upgrades often dwarf a mid-range wallbox sticker price. Use September 2026 planning bands around £800 to £1,400 including VAT for simple 7kW driveway jobs only as a starting illustration.
When you are ready, gather postcode, parking photos and board photos, then request local installer quotes with the shortlist of models you will actually accept.
Frequently asked questions
Is the most expensive charger the best?
Not automatically. Pay for features you will use: reliable app scheduling, suitable IP rating, load balancing, and a warranty your installer supports. Unused solar diversion or dual ports do not repay every buyer.
Can any electrician fit any brand?
You need a competent person for the electrical work and an installer familiar with the chosen unit's commissioning. Some grant routes also require authorised installer status. Ask for evidence relevant to your job.
Should I buy the unit myself?
Only if the installer will still warrant the full installation and the model is accepted for any scheme you need. Bundled supply can simplify call-outs.
What about 22kW at home?
22kW AC usually needs three-phase supply and a vehicle that can take it. Many UK homes are better served by 7kW single-phase overnight charging.
Core buying guides
Start with these high-intent guides, then dig into the rest of the library.
Related guides
Sources and further reading
How this guide was prepared
This guide was written by the Local EV Installers Editorial Team. We compare official guidance, legislation and established consumer information, separate general information from project-specific advice, and show publication dates and sources. We do not accept installer accreditation claims at face value.